GENITEC DONGGUAN CO.,LTD
Genitec&Seprays:PCB Depaneling Total Solution Provider.
Add to Cart
CCD positioning 1000mm/S Auto Glue Dispenser Machine With Actuating Motor
Glue Dispenser Machine Features
High precision and high productmity
Non-contact spray dispensing can ensure consistency and stability
Up to 1.3G acceleration
CCD visual positioning system can realize high-speed identification of Mark points and corner
High cost pertormance:
. Fashionable appearance, compact design, and improved utilization rate
. Good stability, reducing downtime, and maintenance time Reduce material waste
Glue Dispenser Machine Rich Configuration
. With taser height measurement
. Glue constant temperature control system
. High precision electronic scale
. Track the heating module
. It can be matched with pneumatic/piezoelection valve, double-liquid screw value, and other valve bodies
. Can deal with a variety of dispensing application scenarios.
Glue Dispenser Machine Specification
| Dispensing stroke (single track/double track) | single track:X=350,Y=745,Z=70mm | single track:X=350,Y=745,Z=70mm |
| positioning accuracy | ±0.015mm 3 sigma | ±0.01mm 3 sigma |
| repeatability | ±0.015mm 3 sigma | ±0.01mm 3 sigma |
| Maximum moving speed | 1000mm/s | 1300mm/s |
| Maximum acceleration | 1g | 1.3g |
| Drive system | actuating motor | The linear motor (X,Y) servo motor (z) |
| Transfer System | ||
| Conveying height | 900±20mm | 900±20mm |
| Maximum height of component | 50mm | 50mm |
| Width modulation mode | Automatic width adjustment | Automatic width adjustment |
| Widen the range | 50-350mm | 50-350mm |
| maximum load | 5KG | 5KG |
| protocol | SMEMA | SMEMA |
| Requirement | ||
| outline dimension | L770 * W1240 * H1565(mm) | L770 * W11240 * H1565(mm) |
| Air pressure demand | 95psi(0.6Mpa) | 95psi(0.6Mpa) |
| system power supply | AC220V 50/60HZ | AC220V 50/60HZ |
| Equipment weight | 780KG | 1000KG |
